Grade 2 Titanium Rod for Industrial & Chemical Applications — Corrosion Resistant, Lightweight, Custom Supply

Grade 2 titanium rod (UNS R50400) is the industry's most trusted commercially pure titanium bar, delivering an outstanding balance of moderate strength, superior corrosion resistance, and exceptional formability. With a density of just 4.51 g/cm³ — roughly 60% lighter than steel — and a minimum tensile strength of 345 MPa, it solves real industrial challenges where stainless steel fails under chloride attack or stress corrosion cracking. At Baoji Huacan, we manufacture to ASTM B348 and ASME SB348 standards with full OEM/ODM support.

Parameter	Details
Material Grade	Grade 2 Commercially Pure Titanium (CP Ti), UNS R50400
Material Standard	ASTM B348; ASME SB-348 available upon specification confirmation
Dimensions	Round bar diameter: 3–100 mm; standard and custom lengths available, subject to stock and production capability
Mechanical Properties	Tensile Strength: ≥345 MPa; Elongation: ≥20%; yield strength according to applicable material specification and supply condition
Supply Condition	Annealed or other agreed condition, subject to material specification
Surface Finish & Tolerance	Standard mill finish, machined, or polished; dimensional tolerances according to applicable standard or customer drawings
Quality & Customization	EN 10204 3.1 material test certificate (MTC) available upon request; cut-to-length and drawing-based processing available

Lightweight: 60% lighter than steel, lowering system weight by about 45% in fluid handling applications
Corrosion Resistant: Virtually impervious to chloride-stress corrosion cracking, moist chlorine, saltwater and oxidizing acids
Excellent ductility: Elongation > 20%, suitable for cold forming and intricate construction without splitting
Good weldability, less pre-heat requirements as compared with titanium alloys
Non-magnetic: Essential for MRI environments and electronics applications
Non-toxic: Safe for medical and food-contact applications
High melting point: ~1,660°C, supporting demanding thermal environments

Our Precision Parts Processing Workshop

Titanium precision parts processing

Chemical Processing: Reactors, heat exchangers, and piping systems exposed to chlorine, acids, or saltwater — environments where stainless steel pitting failure is common.
Marine & Offshore: Seawater cooling systems and subsea structural components requiring long-term corrosion immunity.
Medical Devices: Surgical equipment and implant related components with biocompatibility and MRI compatibility.
Aerospace & Energy: Lightweight structural parts, fasteners and fluid system components where weight-to-strength ratio is critical.

Be used in a wide range of industries.

Chemical Processing Equipment

Heat Exchangers

Marine Equipment

40+ CNC lathes and machining centers, including gantry systems
4,000-ton hydraulic press for forging
Annual melting capacity: 5,000+ tons
Annual forging capacity: 3,000+ tons
Total annual output: 1,000+ tons of finished titanium products
Capable of producing bars, flanges, rings, tubes, and custom-machined parts


Vacuum Melting	Breakdown Forging	Forging & Rolling

Every titanium rod passes through our multi-stage inspection protocol:

Raw material verification: Spectrometer chemical composition analysis and supplier certification check

In-process inspection Dimensional check at every machining step

Non-destructive testing: Ultrasonic testing for interior fractures or gaps

Dimensional inspection: CMM, calipers and gages for final examination to ensure correctness

Surface inspection: Roughness testers and visual examination for fault free finish

Documentation: Complete full MTC, inspection reports and traceability records per batch

Certifications

ISO 9001 Quality Management System certified
Products manufactured to ASTM B348 / ASME SB348
Material Test Certificates (MTC) available, including EN 10204 3.1

Material Testing & Analysis

Ultrasonic Testing & NDT Inspection

ISO 9001 Quality Management System

Each order is carefully packaged to prevent damage during transit:

Custom foam inserts for precision-machined rods
Vacuum-sealed bags with desiccants for moisture protection
Sturdy wooden crates for bulk shipments
Full labeling and documentation for easy tracking
We offer both air freight (urgent orders) and sea freight (cost-effective bulk shipments) to global destinations.

You can fully customize your order based on project requirements:

Diameter & length: As per your drawings/specifications

Surface finish: Polished, natural or anodized

Tolerances: ASTM standard or customer drawing control

Material grade: Grade 2, 5, 7, 9 or 23 available

Marking: Laser marking or CNC engraving with item numbers or custom logo

Batch size: Prototype, small batch, mass manufacturing

Ready to source high-quality commercially pure titanium bars like grade 2 titanium rod? Contact our team at Joy@hc-titanium.com for pricing, samples, or drawings-based inquiries.