OEM Titanium Machining Parts — Custom Precision Components for High-Performance Applications

Baoji Huacan delivers professional Oem Titanium Machining Parts engineered to your exact drawings and specifications. Backed by 10+ years of titanium machining experience, 40+ CNC machines, and an annual capacity exceeding 1,000 tons, we manufacture titanium custom parts in Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, and Grade 23. Tolerances reach ±0.01mm, with full OEM/ODM support from prototype to bulk production. Whether you need complex aerospace structures or precision medical components, we deliver consistent quality under ISO 9001-certified management.

Oem Titanium Machining Parts

· Tight tolerance control — critical features like sealing surfaces, threaded interfaces, and bore positions held to ±0.01mm

· Complex geometry capability — thin-wall structures, internal channels, and precision interfaces all supported

· Biocompatible and non-magnetic — suitable for medical and sensitive electronic environments

· High strength-to-weight ratio — Ti-6Al-4V delivers tensile strength ≥895 MPa at roughly 60% the density of steel

· Excellent corrosion resistance — stable oxide film protects parts in aggressive chemical and marine environments

Parameter	Details
Material Grade	Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23
Material Standard	ASTM, AMS, ASME, DIN
Dimensional Tolerance	Up to ±0.01mm
Surface Roughness	Customized per application
Surface Treatment	Polished, Anodized, Sand Blasted, Pickled, Passivated
Part Dimensions	Customized per drawing
MOQ	Small batch and bulk both accepted
Design Input	2D drawings, 3D models, samples
Applicable Standard	ASTM B348 / ISO 9001

Solutions One

Aerospace & Defense — Lightweight structural brackets, housings, and fasteners where every gram matters and failure is unacceptable.

Medical & Biotech — Biocompatible implant components and surgical instrument parts requiring Grade 23 (Ti-6Al-4V ELI) and ultra-smooth surface finishes.

Marine & Chemical Processing — Grade 2 and Grade 7 parts for seawater-exposed and corrosive fluid environments where stainless steel falls short.

Energy & Industrial — Precision connectors and valve components operating under high pressure and temperature fluctuation.

Titanium machining is genuinely challenging. Its low thermal conductivity concentrates heat at the cutting edge, causing rapid tool wear and work hardening. Our engineers use optimized tool paths, high-pressure coolant systems, and rigid fixturing to overcome these issues.

You get parts that fully leverage titanium's exceptional strength-to-weight ratio — without sacrificing dimensional accuracy or surface integrity.

Production starts with raw material verification, confirming chemical composition before any cutting begins. Parts then move through CNC turning, milling, drilling, and thread machining — or 5-axis CNC machining for complex geometries.

Where structural strength is required, forging and precision forging are available as upstream processes. Secondary operations including deburring, surface finishing, and assembly complete every component before inspection.

Receiving Drawings

Annealing

Developing Machining Process

Finish Machining

Preparing Raw Materials

Deburring

Rough Machining

Deburring

Our facility operates 40+ CNC lathes, machining centers, and gantry systems. Annual production capacity exceeds 1,000 tons of finished titanium components. We have collaborated with 100+ international clients across aerospace, medical, and industrial sectors.

Upstream melting capacity exceeds 5,000 tons annually, with forging capacity over 3,000 tons, giving us full control from ingot to finished part.


melting	melting	forging	forging	rolling

Every batch of Oem Titanium Machining Parts follows a strict multi-stage protocol:

· PMI / XRF Analysis — verifies chemical composition matches mill certification before machining

· CMM Dimensional Inspection — checks complex geometries and GD&T compliance

· Surface Roughness Testing — Ra values verified per application requirements

· NDT (Ultrasonic & Dye Penetrant) — detects subsurface voids and micro-cracks

· Pressure & Leak Testing — available for fluid-path components on request

Complete inspection reports, material traceability records, and product certificates accompany every shipment.

Mechanical Properties Testing

Inner Diameter Measurement

Ultrasonic Testing

CMM Dimensional

Mounting Hole Diameter Measurement

Quality Management System Certification

Method	Details
Component Protection	Custom foam inserts for precision parts
Moisture Control	Vacuum-sealed bags with desiccants
Bulk Shipment	Sturdy wooden crates
Documentation	Full labeling, certificates, traceability records
Shipping Options	Air freight (urgent) / Sea freight (bulk)

Q: Why does titanium machining cost more than steel?

A：Titanium requires slower cutting speeds, carbide tooling, frequent tool changes, and high-pressure coolant — all of which increase machine time and consumable costs. The result is a part with far superior performance.

Q: What grades are available for OEM parts?

A：Grade 2 offers outstanding corrosion resistance for chemical environments. Grade 5 (Ti-6Al-4V) delivers high structural strength for aerospace and defense. Other grades including Grade 7, 9, and 23 are available depending on your application.

Q: Can anodizing be applied?

A：Yes. Both standard and hard-coat anodizing are supported, offering corrosion enhancement and color-coding options for medical kit identification.

Q: How do you prevent deformation during machining?

A：We use advanced fixturing with broad workpiece contact areas and optimized cutting depths to eliminate spring-back and chatter — ensuring dimensional accuracy throughout.